| 1 | For Java installation instructions, see doc/java_install. |
|---|
| 2 | |
|---|
| 3 | Prior to building libabac |
|---|
| 4 | you may need to install flex, bison, and GNU readline library |
|---|
| 5 | you must install YAP and libstrongswan |
|---|
| 6 | Please check doc/dependencies for other software dependencies |
|---|
| 7 | |
|---|
| 8 | Download yap-6.2.2 from www.dcc.fc.up.pt |
|---|
| 9 | http://www.dcc.fc.up.pt/~vsc/Yap/yap-6.2.2.tar.gz |
|---|
| 10 | |
|---|
| 11 | $patch -p0 -t -i yap6_2_2_patch_1 |
|---|
| 12 | (Patching for FreeBSD or 64bits machines, patch file can be |
|---|
| 13 | found in libABAC's doc directory) |
|---|
| 14 | |
|---|
| 15 | $./configure --enable-dynamic-loading --enable-use-malloc=yes |
|---|
| 16 | $make |
|---|
| 17 | $make library |
|---|
| 18 | $sudo make install_library |
|---|
| 19 | $sudo make install |
|---|
| 20 | |
|---|
| 21 | (Note: If you ever run into the OOOPS message when installing Yap, |
|---|
| 22 | manually clear out all traces of Yap from your /usr/local especially |
|---|
| 23 | /usr/local/share) |
|---|
| 24 | |
|---|
| 25 | |
|---|
| 26 | Download strongswan-4.6.4 from strongswan.org: |
|---|
| 27 | http://download.strongswan.org/strongswan-4.6.4.tar.bz2 |
|---|
| 28 | |
|---|
| 29 | FreeBSD users: add --enable-kernel-pfkey --enable-kernel-pfroute |
|---|
| 30 | --disable-kernel-netlink --disable-tools --disable-scripts |
|---|
| 31 | --disable-pluto --with-group=wheel to strongswan ./configure |
|---|
| 32 | |
|---|
| 33 | Linux users: add --disable-gmp --enable-openssl to strongswan |
|---|
| 34 | ./configure to avoid long credential creation times. The entropy |
|---|
| 35 | sources libstrongswan uses by default gather entropy slowly on |
|---|
| 36 | Linux. These flags allow it to gather entropy from the same |
|---|
| 37 | sources as openssl, which is noticeably faster. The internal |
|---|
| 38 | strongswan libraries and plugins are installed in |
|---|
| 39 | /usr/local/lib/ipsec by default unless |
|---|
| 40 | --with-ipseclibdir and --with-plugindir are set otherwise. |
|---|
| 41 | |
|---|
| 42 | Mac OS X users: (Victor) add |
|---|
| 43 | --enable-kernel-pfkey --enable-kernel-pfroute |
|---|
| 44 | --disable-kernel-netlink --disable-tools --disable-scripts --disable-pluto --with-group=wheel |
|---|
| 45 | and also prepend with following if applicable, |
|---|
| 46 | env CPPFLAGS="-I/opt/local/include" LDFLAGS="-L/opt/local/lib" |
|---|
| 47 | |
|---|
| 48 | $tar xjvf strongswan-4.6.4.tar.bz2 |
|---|
| 49 | $cd strongswan-4.6.4 |
|---|
| 50 | $# see note above about configure flags |
|---|
| 51 | $./configure --enable-monolithic |
|---|
| 52 | $cd src/libstrongswan |
|---|
| 53 | $make && sudo make install |
|---|
| 54 | |
|---|
| 55 | Be sure to make note of the directory into which you've untarred |
|---|
| 56 | strongswan-4.6.4.tar.bz2. You will use this in the next step. |
|---|
| 57 | |
|---|
| 58 | |
|---|
| 59 | BUILDING LIBABAC |
|---|
| 60 | |
|---|
| 61 | FreeBSD users will need to install flex-2.5.35 or greater from |
|---|
| 62 | ports and add |
|---|
| 63 | --with-extra-includes=/usr/local/include |
|---|
| 64 | --with-flex=/usr/local/bin/flex, adjust as needed |
|---|
| 65 | on ./configure line in addition to --with-strongswan=... |
|---|
| 66 | |
|---|
| 67 | MAC OS X (victor) users needs to add these flags |
|---|
| 68 | CFLAGS="-I/opt/local/include" CXXFLAGS="-I/opt/local/include" |
|---|
| 69 | CPPFLAGS="-I/opt/local/include" LDFLAGS="-L/opt/local/lib" |
|---|
| 70 | and --with-flex=/usr/bin/flex, adjust as needed |
|---|
| 71 | |
|---|
| 72 | $STRONGSWAN_SRC_DIR=path/to/strongswan-4.6.4 |
|---|
| 73 | $STRONGSWAN_LIB_DIR=/usr/local/lib/ipsec |
|---|
| 74 | $./autogen.sh |
|---|
| 75 | $./configure --with-strongswan=$STRONGSWAN_SRC_DIR |
|---|
| 76 | --with-strongswan-ld-path=$STRONSWAN_LIB_DIR |
|---|
| 77 | $make |
|---|
| 78 | $sudo make install |
|---|
| 79 | |
|---|
| 80 | |
|---|
